Effects of Fe diffusion driven by thermal history on the tribological behaviour of Al–Si coated 22MnB5 under varying load conditions in hot stamping, Journal of Materials Research and Technology-JMR&T , 제35권(집) , PP.5475~5483 , 2025.04.01

Corrosion Behavior of AZ31 and AZ31-0.5Ca in Different Concentrations of NaCl and Na2SO4 at Various Temperatures, CORROSION , 제81권(집) , 제3호 , PP.232~244 , 2025.03.01

Twinning-induced texture weakening in Mg alloy and its consequent influence on ductility and formability, MATERIALS SCIENCE AND TECHNOLOGY , 제41권(집) , 제2호 , PP.101~105 , 2025.02.01

A Critical Review on the Comparative Assessment of Rare-Earth and Non-Rare-Earth Alloying in Magnesium Alloys, Metals , 제15권(집) , 제2호 , 2025.02.01

Abnormal twin-twin interaction by {1122} twinning in [0001]-oriented micropillar of pure titanium at cryogenic temperature, SCRIPTA MATERIALIA , 제255권(집) , 2025.01.15

Unraveling the anisotropic corrosion behavior along the building direction in laser powder bed fusion processed Hastelloy X, Journal of Materials Research and Technology-JMR&T , 제33권(집) , PP.1188~1200 , 2024.11.01

Nanoindentation creep response of Ti–6Al–4V ELI alloy manufactured via laser powder bed fusion, Journal of Materials Research and Technology-JMR&T , 제33권(집) , PP.2803~2811 , 2024.11.01

Effect of Al addition on the room and cryogenic temperature deformation of Mg-xAl-1Zn-1Ca alloy ( x = 1, 2 wt.%), Journal of Magnesium and Alloys , 제12권(집) , 제11호 , PP.4694~4708 , 2024.11.01

Effect of cryogenic temperature on the strengthening mechanisms of AZ61 Mg alloy extruded at different temperatures, Journal of Materials Research and Technology-JMR&T , 제33권(집) , PP.335~348 , 2024.11.01

Strain localisation and grain boundary-mediated deformation in pure titanium at low and high temperatures: In-situ optical microscopy and digital image correlation, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제914권(집) , 2024.11.01

Comparative Study of Room and Cryogenic Deformation Behavior of Additive Manufactured Ti–6Al–4V Alloy, ADVANCED ENGINEERING MATERIALS , 제26권(집) , 제20호 , 2024.10.01

Revealing the microstructural evolution and mechanical response of repaired Fe–Cr–Si based alloy by directed energy deposition, Journal of Materials Research and Technology-JMR&T , 제32권(집) , PP.4444~4455 , 2024.10.01

Thermal activation and dislocation dynamics in Ti–6Al–4V alloy, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , 제277권(집) , 2024.09.01

Room and cryogenic deformation behavior of AZ61 and AZ61-xCaO ( x = 0.5, 1 wt.%) alloy, Journal of Magnesium and Alloys , 2024.05.13

Synergetic improvement in strength and ductility of AZX211 Mg alloy facilitated by {10–12}-{01–12} twin-twin interactions during pre-stretching at cryogenic temperature, Journal of Materials Research and Technology-JMR&T , 제29권(집) , PP.3249~3254 , 2024.04.01

Achieving synergistic improvement of wear and mechanical properties in Ti–6Al–4V alloy by multiple cryogenic treatment, Journal of Materials Research and Technology-JMR&T , 제29권(집) , PP.5118~5125 , 2024.04.01

The Effect of V/C Ratio on the Phase Formation Behavior in Vanadium Carbide-Based Tool Steel Fabricated through Powder Metallurgy, STEEL RESEARCH INTERNATIONAL , 제95권(집) , 제2호 , 2024.02.01

Effect of Calcium on the Rate of Grain Boundary Migration in Pure Magnesium During Annealing, METALS AND MATERIALS INTERNATIONAL , 2024.01.28

Exceptional improvement in the yield strength of AZ61 magnesium alloy via cryo-stretching and its implications on the grain growth during annealing, Journal of Alloys and Compounds , 제970권(집) , 2024.01.05

Temperature-dependent behavior of CP-Ti interpreted via self-consistent crystal plasticity simulation, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제890권(집) , 2024.01.01

Dynamic recrystallization of commercially pure titanium during cryogenic compression, MATERIALS CHARACTERIZATION , 제206권(집) , 2023.12.01

Effect of CaO Content and Annealing Treatment on the Room-Temperature Mechanical Properties of AZ61 and AZ61-CaO Alloys, Metals , 제13권(집) , 제12호 , 2023.12.01

Effect of strain rate on the deformation of 6061-T6 aluminum alloy at cryogenic temperature, MATERIALS CHARACTERIZATION , 2023.12.01

Implications of twinning on the microstructure development, crystallographic texture and mechanical performance of Mg alloys- a critical review, Journal of Magnesium and Alloys , 제11권(집) , 제11호 , PP.4146~4165 , 2023.10.28

Mitigating HAZ softening of friction stir welded ferrite-martensite DP steel followed by post weld heat treatment, MATERIALS LETTERS , 제349권(집) , 2023.10.15

Effects of Paint Baking Heat Treatments on Mechanical Properties and Microstructure of Resistance Spot-Welded A5022-O and A6014-T4 Alloys, Metals , 제13권(집) , 제10호 , 2023.10.05

Tensile strain-hardening behavior and related deformation mechanisms of pure titanium at cryogenic temperature, Journal of Materials Research and Technology-JMR&T , 2023.10.01

Detailed Structural Analysis of Cylindrical Steel Tank Subjected to Various Seismic Peak Ground Values Using FSI Approach, Applied Mechanics , 제4권(집) , 제3호 , PP.990~1014 , 2023.09.15

Surface hardening and plastic stability of Ti–6Al–4V alloy by cryo-quenching, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제881권(집) , 2023.08.10

Effect of holding time between cryogenic treatment and tempering process on microstructural and mechanical properties of Ti-6Al-4V alloy, Materials Today Communications , 2023.08.01

Unravelling anisotropic deformation behaviour of Ti-6Al-4V ELI fabricated by powder bed fusion additive manufacturing, MATERIALS CHARACTERIZATION , 제202권(집) , 2023.08.01

Effect of Ca alloying and cryogenic temperature on the slip transmission across the grain boundary in pure Mg, Journal of Alloys and Compounds , 제950권(집) , 2023.07.25

Effect of Micro-Arc Oxidation Voltage on the Morphology and Electrochemical Properties of AZ31B Magnesium Alloy, Modern Concepts in Material Science , 제5권(집) , 제2호 , 2023.07.12

Effect of Heat Treatment on Corrosion and Mechanical Properties of M789 Alloy Fabricated Using DED, Metals , 제13권(집) , 제7호 , 2023.07.01

Role of silicon on formation and growth of intermetallic phases during rapid Fe–Zn alloying reaction, Materials Today Advances , 제18권(집) , 2023.06.01

In-situ study of anisotropic strain-hardening and grain boundary mediated deformation in commercially pure titanium, Journal of Materials Research and Technology-JMR&T , 제24권(집) , PP.5389~5403 , 2023.05.01

Numerical Investigation of an Optimum Ring Baffle Design to Optimize the Structural Strength of a Tank Subjected to Resonant Seismic Sloshing, Structural Engineering International , 제33권(집) , 제2호 , PP.350~360 , 2023.04.03

Effect of welding speed on the microstructure and texture development in the individual weld zone of friction stir welded DP780 steel, Journal of Materials Research and Technology-JMR&T , 제23권(집) , PP.4976~4989 , 2023.04.01

Effect of Texture and Temperature on Strain-Induced Martensitic Transformation in 304 Austenitic Stainless Steel, STEEL RESEARCH INTERNATIONAL , 제94권(집) , 제2호 , 2023.02.01

Fabrication of nanocage structured based electrocatalyst for oxygen evolution reactions, MATERIALS LETTERS , 2023.01.15

극저온이 22MnB5강의 냉간 스탬핑 마모에 미치는 영향, 한국트라이볼로지학회지 , 제38권(집) , 제6호 , PP.241~246 , 2022.12.31

Biodegradable properties of AZ31-0.5Ca magnesium alloy, MATERIALS TECHNOLOGY , 제37권(집) , 제12호 , PP.2230~2241 , 2022.10.15

Investigating local strain rate sensitivity of the individual weld zone in the friction stir welded DP 780 steel, Journal of Materials Research and Technology-JMR&T , 제20권(집) , PP.508~515 , 2022.10.01

Investigating the Microstructure, Crystallographic Texture and Mechanical Behavior of Hot-Rolled Pure Mg and Mg-2Al-1Zn-1Ca Alloy, Crystals , 제12권(집) , 제10호 , 2022.10.01

Effect of deformation temperature on the slip activity in pure Mg and AZX211, Journal of Materials Research and Technology-JMR&T , 제19권(집) , PP.3406~3420 , 2022.07.01

Development of Multiscale Composite with Hybrid Natural Nanofibers, Materials , 제15권(집) , 제13호 , 2022.07.01

A high-temperature adhesive for stainless steel 304: Effect of Cr growth at the interface of alkali silicate adhesive, INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , 제116권(집) , 2022.07.01

Effect of CaO on structure and properties of AZ61 magnesium alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제844권(집) , 2022.06.02

Normalizing Effect of Heat Treatment Processing on 17-4 PH Stainless Steel Manufactured by Powder Bed Fusion, Metals , 제2022권(집) , 제5호 , 2022.05.01

Corrosion behaviour of AZ31 magnesium with calcium addition, CORROSION SCIENCE , 제199권(집) , 2022.05.01

The role of cryogenic quenching on the mechanical properties of FSWed 6061-T6 aluminium alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제840권(집) , 2022.04.18

In‑situ neutron diffraction study of lattice deformation behaviour of commercially pure titanium at cryogenic temperature, Scientific Reports , 제12권(집) , 제1호 , 2022.03.08

Designing highly ductile magnesium alloys: current status and future challenges, CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES , 제47권(집) , 제2호 , PP.194~281 , 2022.03.04

A Comparative Study of Strain Rate Constitutive and Machine Learning Models for Flow Behavior of AZ31-0.5 Ca Mg Alloy during Hot Deformation, Mathematics , 제10권(집) , 2022.03.01

In-situ diffraction based observations of slip near phase boundaries in titanium through micropillar compression, MATERIALS CHARACTERIZATION , 제184권(집) , 2022.02.01

{10–12} extension twinning activity and compression behavior of pure Mg and Mg-0.5Ca alloy at cryogenic temperature, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제831권(집) , 2022.01.13

Influence of heat treatment and loading direction on compressive deformation behaviour of Ti–6Al–4V ELI fabricated by powder bed fusion additive manufacturing, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제831권(집) , 2022.01.13

Microstructure Features and Superplasticity of Extruded, Rolled and SPD-Processed Magnesium Alloys: A Short Review, Metals , 제11권(집) , 제11호 , 2021.11.03

Diamond-like Carbon Tribological Endurance usingan Energetic Approach, 한국트라이볼로지학회지 , 제37권(집) , 제5호 , PP.179~188 , 2021.10.31

The role of strain rate and texture in the deformation of commercially pure titanium at cryogenic temperature, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제827권(집) , PP.142042~ , 2021.10.19

Evaluation of liquid metal embrittlement crack in resistance spot welds under intensive welding condition using industrial X-ray computed tomography and machine learning, Welding in the World , 제65권(집) , 제10호 , PP.1887~1897 , 2021.10.01

Highly improved mechanical and thermal properties of alkali silicate and graphene nanoplatelet composite adhesives, INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , 제110권(집) , 2021.10.01

Mechanically Stable Thinned Membrane for a High-Performance Polymer Electrolyte Membrane Fuel Cell via a Plasma-Etching and Annealing Process, ENERGY & FUELS , 제35권(집) , 제14호 , PP.11525~11532 , 2021.07.15

Effect of PWHT on the Microstructure and Mechanical Properties of Friction Stir Welded DP780 Steel, Metals , 제11권(집) , 제7호 , 2021.07.10

Effects of initial texture on deformation behavior during cold rolling and static recrystallization during subsequent annealing of AZ31 alloy, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , 제66권(집) , PP.139~419 , 2021.03.10

Effect of post-weld heat treatment on mechanical properties of local weld-affected zones in friction stir welded AZ31 plates, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제805권(집) , PP.140809~ , 2021.02.23

Effect of texture and temperature gradient on anisotropic plastic deformation of commercially pure titanium at room and low temperatures, MATERIALS CHARACTERIZATION , 제172권(집) , 2021.02.01

마찰 방법에 따른 핫스탬핑 마모 거동의 연구 동향, 한국트라이볼로지학회지 , 제36권(집) , 제6호 , PP.350~358 , 2020.12.31

Effects of building direction and heat treatment on the local mechanical properties of direct metal laser sintered 15-5 PH stainless steel, MATERIALS CHARACTERIZATION , 제167권(집) , 2020.09.01

Effects of Al-Si Coating Thickness on 22MnB5 in Hot Stamping Wear, Korean Journal of Metals and Materials , 제58권(집) , 제8호 , PP.573~582 , 2020.08.05

Improving the water resistance and adhesion strength of a mixed alkali silicate adhesive by optimizing the molar ratio and curing conditions, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , 제34권(집) , 제12호 , PP.1269~1282 , 2020.06.17

Yttrium segregation induced grain growth inhibition during recrystallisation in binary titanium alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제779권(집) , 2020.03.27

Investigating spatio-temporal deformation in single crystal Ni-based superalloys using in-situ diffraction experiments and modelling, Materialia , 제9권(집) , 2020.03.01

Shock Absorber Mechanism Based on an SMA Spring for Lightweight Exoskeleton Applications, International Journal of Precision Engineering and Manufacturing , 제20권(집) , 제9호 , PP.1533~1541 , 2019.09.01

Effect of process parameters on the joint strength in ultrasonic welding of Cu and Ni foils, MATERIALS AND MANUFACTURING PROCESSES , 제34권(집) , 제11호 , PP.1217~1224 , 2019.08.18

Literature Review on Fretting Wear and Contact Mechanics of Tribological Coatings, Coatings , 제9권(집) , 제8호 , PP.501~520 , 2019.08.07

Local and global deformation behaviour in rolled pure magnesium sheets at room temperature under different strain rates, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제762권(집) , 2019.08.05

Global and local strain rate sensitivity of commercially pure titanium, JOURNAL OF ALLOYS AND COMPOUNDS , 제803권(집) , PP.711~720 , 2019.06.26

The role of beta-titanium ligaments in the deformation of dual phase titanium alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제746권(집) , PP.394~405 , 2019.02.11

Fabrication and design of mechanically stable and free-standing polymeric membrane with two-level apertures, Soft Matter , 제14권(집) , 제47호 , PP.9522~9527 , 2018.12.18

Direct volumetric measurement of crystallographic texture using acoustic waves, ACTA MATERIALIA , 제159권(집) , PP.384~394 , 2018.10.15

Strain rate sensitivity in commercial pure titanium: The competition between slip and deformation twinning, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제734권(집) , PP.385~397 , 2018.09.12

금속 재료의 국부 변형 거동 분석 방법과 연구 동향: 리뷰, Korean Journal of Metals and Materials , 제56권(집) , 제9호 , PP.635~644 , 2018.09.05

A comparison of mechanical properties and residual stresses of line pipes sized by expansion and compression process, INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING , 제163권(집) , PP.1~7 , 2018.03.30

Deformation behaviour of [001] oriented MgO using combined in-situ nano-indentation and micro-Laue diffraction, ACTA MATERIALIA , 제145권(집) , PP.516~531 , 2018.01.09

A new beta titanium alloy system reinforced with superlattice intermetallic precipitates, SCRIPTA MATERIALIA , 제140권(집) , PP.71~75 , 2017.11.30

항공, 바이오, 원자력 부품의 프레팅 마모 현상 비교 연구, 항공우주시스템공학회지 , 제11권(집) , 제2호 , PP.16~22 , 2017.04.30

The effect of the beta phase on the micromechanical response of dual-phase titanium alloys, INTERNATIONAL JOURNAL OF FATIGUE , 제100권(집) , 제1호 , PP.377~387 , 2017.03.24

Influence of load on the friction coefficient of fretted electro-deposited coatings against steel and zirconia balls, International Journal of Surface Science and Engineering , 제10권(집) , 제5호 , PP.514~526 , 2016.12.01

Determination of Ti-6242 alpha and beta slip properties using micro-pillar test and computational crystal plasticity, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS , 제95권(집) , PP.393~410 , 2016.10.31

Intrinsic anisotropy of strain rate sensitivity in single crystal alpha titanium, ACTA MATERIALIA , 제118권(집) , PP.317~330 , 2016.10.01

A nanoindentation investigation of local strain rate sensitivity in dual-phase Ti alloys, JOURNAL OF ALLOYS AND COMPOUNDS , 제672권(집) , PP.282~291 , 2016.07.05

Local strain rate sensitivity of single alpha phase within a dual-phase Ti alloy, ACTA MATERIALIA , 제107권(집) , PP.298~309 , 2016.04.01

Local deformation mechanisms of two-phase Ti alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , 제649권(집) , PP.39~47 , 2016.01.01

Evaluation of Residual Stresses in 12%-Cr Steel Friction Stir Welds by the Eigenstrain Reconstruction Method, 한국생산제조시스템학회지 , 제24권(집) , 제1호 , PP.15~22 , 2015.02.15

Residual stresses in linear friction welding of aluminium alloys, MATERIALS & DESIGN , 제50권(집) , PP.360~369 , 2013.09.30

Analysis of Preferred Orientations in Linear Friction Welded (LFW) Aluminium Alloy Specimens using “One-shot” Multi-element Energy Dispersive Synchrotron X-ray Diffraction, POWDER DIFFRACTION , 제28권(집) , 제2호 , PP.327~332 , 2013.09.01

High-energy transmission Laue micro-beam X-ray diffraction: a probe for intra-granular lattice orientation and elastic strain in thicker samples, JOURNAL OF SYNCHROTRON RADIATION , 제19권(집) , 제3호 , PP.307~318 , 2012.05.01

Residual stress characterisation in 12%-Cr steel friction stir welds by neutron diffraction, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , 제47권(집) , 제4호 , PP.203~213 , 2012.03.26

A synchrotron tomographic energy-dispersive diffraction imaging study of the aerospace alloy Ti 6246, JOURNAL OF APPLIED CRYSTALLOGRAPHY , 제44권(집) , 제1호 , PP.150~157 , 2011.02.01

Inverse eigenstrain analysis of the effect of non-uniform sample shape on the residual stress due to shot peening, EXPERIMENTAL MECHANICS , 제51권(집) , 제2호 , PP.165~174 , 2011.02.01

Evaluation of the overload effect on fatigue crack growth with the help of synchrotron XRD strain mapping, ENGINEERING FRACTURE MECHANICS , 제77권(집) , 제16호 , PP.3216~3226 , 2010.11.30

Eigenstrain reconstruction method in linear friction welded aluminium alloy and MMC plates, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING , 제84권(집) , 제8호 , PP.989~1008 , 2010.11.19

Mechanical and microstructural characterization of 2124Al/25vol.% SiC p joints obtained by linear friction welding (LFW), COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , 제41권(집) , 제9호 , PP.1028~1037 , 2010.09.30

Residual strains in AA2024/AlSiC p composite linear friction welds, MATERIALS & DESIGN , 제31권(집) , PP.117~120 , 2010.06.30

Microstructure, residual strain, and eigenstrain analysis of dissimilar friction stir welds, MATERIALS & DESIGN , 제31권(집) , PP.121~125 , 2010.06.30

Evaluation of residual stresses and strains using the eigenstrain reconstruction method, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , 제47권(집) , 제13호 , PP.1678~1686 , 2010.06.15

High energy transmission micro-beam Laue synchrotron X-ray diffraction, MATERIALS LETTERS , 제64권(집) , 제11호 , PP.1302~1305 , 2010.06.15

Linear Friction Welding (LFW) of metal matrix composites, METALLURGIA ITALIANA , 제3권(집) , PP.23~30 , 2010.03.01

Numerical and experimental study of residual stresses in a linear friction welded Al-SiCp composite, Advanced Materials Research , 제89권(집) , PP.268~274 , 2010.01.01

A study on similar and dissimilar linear friction welds of 2024 Al alloy and 2124Al/SiCP composite, Advanced Materials Research , 제89권(집) , PP.461~466 , 2010.01.01

Crack tip deformation fields and fatigue crack growth rates in Ti?6Al?4V, INTERNATIONAL JOURNAL OF FATIGUE , 제31권(집) , 제11호 , PP.1771~1779 , 2009.12.31

Triaxial residual strains in a railway rail measured by neutron diffraction, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , 제44권(집) , 제7호 , PP.563~568 , 2009.10.01

Inverse eigenstrain analysis of residual stresses in friction stir welds, Procedia Engineering , 제1권(집) , PP.213~216 , 2009.07.31

Eigenstrain analysis of non-uniformly shaped shot-peened samples, Procedia Engineering , 제1권(집) , PP.151~154 , 2009.07.31

Investigation of changes in crystalline and amorphous structure during deformation of nano-reinforced semi-crystalline polymers by space-resolved synchrotron SAXS and WAXS, Procedia Engineering , 제1권(집) , PP.159~162 , 2009.07.31

A study of residual stresses in vacuum plasma sprayed tungsten coatings, Advances in X-Ray Analysis , 제52권(집) , PP.519~528 , 2009.01.30

ANALYSIS OF STRAIN-INDUCED PEAK BROADENINGIN TITANIUM ALLOYS, Advances in X-Ray Analysis , 제52권(집) , PP.217~224 , 2009.01.30

A study of residual stresses in Al/SiCp linear friction weldment by energy-dispersive neutron diffraction, Key Engineering Materials , 제385권(집) , PP.517~520 , 2008.07.02

Synchrotron energy-dispersive X-ray diffraction analysis of residual strains around friction welds between dissimilar aluminium and nickel alloys, Materials Science Forum , 제571권(집) , PP.277~282 , 2008.03.01